2017 Ford F-150 Owner’s Manual — Using Stability Control
Stability Control
AdvanceTrac™ with Roll Stability Control™ (RSC™)
The system automatically turns on each time you switch the ignition on.
You can switch the electronic stability control systems off.
When you shift the transmission into reverse (R), the systems are disabled.
You can switch the traction control system off or on independently. See
Using Traction Control.
| AdvanceTrac with RSC Features | ||||
|---|---|---|---|---|
| Button functions | Stability control OFF light | Roll stability control | Electronic stability control | Traction control system |
| Default at start-up | Illuminated during bulb check | Enabled | Enabled | Enabled |
| Button pressed momentarily | Illuminated | Enabled | Enabled | Disabled |
| Button pressed and held for more than 5 seconds | Illuminated | Enabled | Disabled | Disabled |
| Double press * Sport Mode | Illuminated | Enabled | Enabled with higher threshold target | Enabled with higher threshold target |
| Button pressed again after deactivation | Not illuminated | Enabled | Enabled | Enabled |
| Transfer case switched to 4WD Low | Illuminated | Disabled | Disabled | Disabled |
*On F-150 Raptor models, the double press function to put your vehicle into sport mode is not available. You can access sport mode through the terrain management system.
Stored owner’s manualImported HTML from the shared Autotk manuals tables. Not an official Toyota site.